Snap On / CDI Computorq 3 1002CF3HA High Accuracy Torque Wrench, 3/8" Drive

Description

Snap On / CDI Computorq 3 1002CF3HA High Accuracy Torque Wrench, 3/8th Anvil. Shipped with USPS Priority Mail.
New, Open Box.
Comes with certificate of calibration (see photos)
The CDI 1002CF3 High Accuracy 3/8" Drive Computorq 3 Electronic Torque Wrench offers English Ranges in 10-100 Ft Lbs &
120-1200
In lbs and Metric Ranges of 13.6-135.6 Nm &
138-1382
KgCm
. This CDI electronic torque wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm.
Simply set the desired torque value and apply force until the green LED illuminates.
Features:
Sleek design
15-degree flex ratcheting head.
Push button socket release head.
Large, easy to read digital display.
Long battery life, uses 2 each CR123 lithium batteries.
Ergonomically designed molded non-slip rubber grip.
Torques in both clockwise and counterclockwise directions.
Battery saving auto-shutoff after two minutes.
COMPUTORQ 3 remembers last unit and torque setting selected.
Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound.
3 color LED light bar:
YELLOW LED
indicates approaching desired torque setting
GREEN LED
indicates desired torque value is reached
RED LED
indicates fastener was overtorqued, loosen and re-tighten.
When desired torque value is reached, display will hold value and flash for ten seconds.
COMPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
ACCURACY: ±1% CW of readings from 20% to 100% of full scale & ±3% CCW of readings from 20% to 100% of full scale.
N.I.S.T. traceable certificate of calibration included.
Drive:
3/8"
Torque Range in. lb.:
120 - 1200 in.lb
Torque Range ft. lb.:
10.0 - 100.0
Torque Range Nm:
13.6 - 135.6
Torque Range Kg.Cm.:
138 - 1382
Length In. (mm) :
17 (432)
Wt. Lbs. (kgs):
2.2 (1.0)