GM/CHEVY/JEEP DANA 44 COMPLETE 1-TON CROSSOVER HIGH STEER KIT-W/KNUCKLES AND DOM

Description

Dana 44 Chevy/Jeep Cross Over
/ High Steer
. The Kit is Complete and also comes with DOM Tubing,  Passenger Side and Driver Side Knuckles
Knuckle is made in USA by East West Off Road
Arms are made with
Domestic Billet Blocks
and Machined by
American Workers
to ensure a
Life Time Warranty
. Arms are Whooping
1.25”
Thick
with
4 Holes
Style to Suit Reid Knuckles, Solid Knuckles, Stock Knuckles or any other After Market Knuckles.
Tie Rod Ends are made
Metal to Metal
with
Spring Technology
way beyond any Expectations.
Kit Includes:
1 - Dana 44 Driver Side Flat Top Knuckle from EWO (Black Powder Coated)
1 - Dana 44 Passenger Flat Top Side Knuckle from EWO (NON
Powder
Coated)
1 - Driver Side Arm (1.25" Thick) Tapered for 7/8" Chevy 3/4 Ton Tie Rods
1 – Passenger Side Arm (1.25” Thick) Tapered for 7/8” Chevy ¾ Ton Tie Rods
2 – 60” x 1.50” x .250” DOM Tubing Lengths
1 – ES 2026 R Drag Link End with Grease Fitting, Castle Nut and Cotter Pin
1 – ES 2027 L Drag Link End with Grease Fitting, Castle Nut and Cotter Pin
1 - ES 2234 L Tie Rod End with Grease Fitting, Castle Nut and Cotter Pin
1 - ES 2234 R Tie Rod End with Grease Fitting, Castle Nut and Cotter Pin
8 – Chromoly 9/16” Studs
8 – Conical Washers
8 – Lock Nuts
2 – 7/8 – 18 Left Inserts/Tube Adapters/ Weld Bungs
2 – 7/8 – 18 Right Inserts/ Tube Adapters/ Weld Bungs
2 – 7/8 – 18 Left Jam Nuts
2 – 7/8 – 18 Right Jam Nuts
1- 4" Drop Pitman Arm with 32 Splines Fully Indexed
2 - Upper Ball Joints
2 - Lower Ball Joints