Craftsman Torque Wrench USA [ Choose Model ]

Description

CRAFTSMAN
Torque Wrench
All torque wrenches listed here are used.  Please refer to the description and photos of each model for detail.  All of these torque wrenches, regardless of the cosmetic condition, are still in good working order.  However, due to the age of the tool we will clean and re-lube the ratchet mechanism and have the tool rechecked for accuracy prior to shipping
to give you a long-term, reliable service
.  Buy with confidence!  These are the last iterations of the American-made Craftsman torque wrenches.
Model 44593
Microtork
, 3/8" drive, 25-250 in-lbs. with 1 in-lb. increments.  SAE and metric dual scales.  Accuracy is within +/- 4% on clockwise or right-hand reading greater than 20% of capacity (i.e. 50-250 in-lbs).  Good condition.  Lock ring is slightly loose.
Model 44594
Microtork
, 3/8" drive, 10-75 ft-lbs. with 0.5 ft-lb. increments.  SAE and metric dual scales.  Accuracy is within +/- 4% on clockwise or right-hand reading greater than 20% of capacity (i.e. 15-75 ft-lbs).  Barely used.  Like new.
Model 44597
Digitork
, 1/2" drive, 25-250 ft-lbs. with 2 ft-lb. increments.  SAE and metric dual scales.  Accuracy is within +/- 4% on clockwise or right-hand reading greater than 20% of capacity (i.e. 50-250 ft-lbs).  Tool has seen regular use for the past 15+ years and it shows.  There are discolorations on the rubber grip and some scuff marks on the plastic adjusting knob.  Fair cosmetic condition we consider but still works perfectly.
NOTE
1. The
Digitork
is not a digital or electronic torque wrench.  It is a click-type torque wrench in which a click can be felt/heard when the set torque is reached.
2. The internals of the wrench are lubed for life and shall not be disassembled or re-oiled.
3. To avoid damages during the transit we may set the wrench at a slightly higher torque value for shipping.  Please reset the torque back to its baseline when you receive it.  Torque wrenches of this type shall be stored at their lowest torque setting (not zero).  The spring inside the tool has to be kept under tension at all times.
4. Please note all tool sales are final.  Tools are not returnable for any reason.