COMMSCOPE CSAPDU5VP HOME CONNECT SUBSCRIBER AMPLIFIER UNITY FWD/REV VoIP

Description

This is a used (tested and working) Commscope branded two-way subscriber amplifier. Does not come with any special power source or cables, simply the unit as shown. Includes 4 video port output and 1 VoIP port output. Will come in standard USPS frustration-free packing.
Specifications
Product Classification
Product Type
RF amplifier
Product Brand
HomeConnect®
General Specifications
Device Type
All ports down amplifier | Two-way subscriber amplifier | VoIP subscriber amplifier
Application
Indoor | Outdoor
Patent Number
7912431 (expires 8/2/2025)
Video Ports, quantity
4
Video Standard
NTSC
VoIP Passive Ports, quantity
1
Electrical Specifications
Distortion Performance (CCN), minimum
60 dBc
Distortion Performance (CSO), minimum
65 dBc
Distortion Performance (CTB), minimum
73 dBc
Distortion Performance (DSO), minimum
55 dBc
Distortion Performance (DTO), minimum
60 dBc
Distortion Performance (X-Mod), minimum
73 dB
Group Delay, 2nd channel, maximum
30 ns
Group Delay, channel 3, maximum
15 ns
Group Delay, channel 4–6, maximum
5 ns
Group Delay, reverse, maximum
25 ns
Hum Modulation, minimum
-75 dB
Impedance
75 ohm
Operating Current at Voltage
380 mA @ 15 Vdc
Shielding Effectiveness, minimum
100 dB
Surge Capability Test Method
ANSI/SCTE 81 | IEEE C62.41-B3 (6 kV, 3000 A, Combination wave) on all ports
Surge Capability Waveform
1.2/50 voltage and 8/20 current combination waveform | 100 kHz ring wave waveform
Electrical Specifications, Isolation
Isolation at Frequency Band, output to output, minimum
25 dB @ 5–1002 MHz
Isolation at Frequency Band, output to VoIP, minimum
25 dB @ 5–1002 MHz
Isolation at Frequency Band, power port to RF output, minimum
60 dB @ 5–1002 MHz
Isolation at Frequency Band, VoIP to output, minimum
25 dB @ 5–1002 MHz
Electrical Specifications, MoCA
Band Rejection, output to input, minimum
40 dB
Band Rejection, VOIP to input, minimum
35 dB
Insertion Loss, output to output, maximum
35 dB
Insertion Loss, output to VOIP, maximum
35 dB
Insertion Loss, VOIP to output, maximum
35 dB
Operating Frequency Band
1125 – 1675 MHz
Electrical Specifications, Rx (Uplink)
Flatness
±1.0 dB
Insertion Loss, video ports
0 dB
Return Loss, minimum
20 dB
Noise Figure, maximum
18 dB
Operating Frequency Band
5 – 42 MHz
Electrical Specifications, Tx (Downlink)
Flatness
±1.0 dB
Gain, video ports
0 dB
Noise Figure, maximum
10.5 dB
Operating Frequency Band
54 – 1002 MHz
Return Loss, minimum
20 dB
Electrical Specifications, VoIP
Insertion Loss Rx at Frequency Band, VoIP ports, maximum
4.3 dB @ 5–42 MHz
Insertion Loss Tx at Frequency Band, VoIP ports, maximum
4.5 dB @ 54–550 MHz | 6.5 dB @ 550–1002 MHz
Return Loss at Frequency Band, VoIP ports, minimum
20 dB @ 5–1002 MHz
Environmental Specifications
Operating Temperature
-40 °C to +60 °C (-40 °F to +140 °F)
Safety Standard
SCTE
Packaging and Weights
Height, packed
230.124 mm | 9.06 in
Width, packed
385.064 mm | 15.16 in
Length, packed
445.008 mm | 17.52 in
Carton Quantity
20
Included
Power adapter | Power inserter
Weight, gross
12.306 kg | 27.13 lb
Regulatory Compliance/Certifications
Agency
Classification
ISO 9001:2015
Designed, manufactured and/or distributed under this quality management system
ROHS
Compliant
CHINA-ROHS
Below maximum concentration value
REACH-SVHC
Compliant as per SVHC revision on www.commscope.com/ProductCompliance