-40%

AC/Delco~214-2082~ Updated Vapor Canister Vent Valve~19207763 ~Silverado~Sierra~

$ 44.32

Availability: 193 in stock
  • Brand: ACDelco GM Original Equipment
  • MPN: 2142082
  • Restocking Fee: 15%
  • Returns Accepted: Returns Accepted
  • Interchange Part Number: 19207763
  • Manufacturer Part Number: 214-2082
  • OE Spec or Performance/Custom: OE Spec
  • Refund will be given as: Money Back
  • Condition: New
  • Warranty: 1 Year
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days

    Description

    ACDELCO
    PART #  214-2082
    Standard ACDELCO WARRANTY   1 Year
    Please email us  your vin number before ordering to ensure your getting the correct part.
    WHY
    FIREHOUSE5 ?
    Ø
    We sell quality ACDelco Parts and back them with the full factory warranty
    Ø
    We package and ship out our orders the same day M-F until 3:00PM EST
    Ø
    When we say it’s ACDelco…it’s 100% ACDelco guaranteed
    Ø
    Most Photos are of the actual part. There is no guessing you get the genuine article, with the ACDELCO WARRANTY
    Ø
    We are an ACDelco Distributor, not just someone selling parts out of  their basement
    Ø
    Your feedback is critical. You expect 100% satisfaction, and we deliver it.
    Ø
    In most cases we try insure everything is included in the box and nothing is broken except for factory sealed electrical parts which would void the warranty.
    Ø
    Selling parts since 1949 …enough said
    Ø
    Thank you for your trust in us!
    For additional product information please refer to the ACDelco website or contact us.
    ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including “maintenance” parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as “repair” parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.
    ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.
    WE SHIP USPS, & FEDEX. PLEASE NO PO BOX ADDRESSES.
    Please give us a physical street address to ship the product to. Firehouse 5 will not ship to a P.O. Box so don’t ask. All credit card sales must be shipped to the billing address on the credit card used no exceptions (sorry) Buyers are responsible for return shipping charges Thank you for your cooperation and understanding
    Shipping is free to the lower 48 all others please contact us first before ordering for rates. We will check Fedex & USPS for lowest rates.
    Please allow up to 24 hours for email responses. Thank you for your patience
    RETURN POLICY
    All Return shipping paid by:Buyer
    Item must be returned within: 30 days
    Refund will be given as: Pay Pal refund or Credit Card
    We are committed to providing the best customer satisfaction possible. We will gladly refund or replace any defective item and most non-defective items. However, we reserve the right to charge a restocking fee of up to 20% of the order. Within 30 days of receipt of your order, you may return products that are: in their original undamaged unopened  packaging, have original manufacturer information, are not used, installed, or disassembled, are not damaged due to incorrect installation, do not having missing parts, hardware or instructions.   Once we have received  your  return, conducted an inspection of the return, and verified that your return meets the above guidelines, a full refund will be issued. All applicable sales taxes will be refunded. The cost of shipping will be credited only in those instances that the return is a
    result of our error
    . Please allow up to 4 business days after we have received the products for your refund to be issued. Thank you.
    WARRANTY
    Warranty Duration:
    12 month
    Warranty Type:
    Replacement Warranty
    Condition
    Some customers may comment about the check engine light being illuminated. They may also comment that their vehicle is difficult to fill with fuel or when filling, the pump continuously shuts off before the tank is full.
    When checking the vehicle for DTCs, the ECM may report one or more of the following DTCs set as current or in history: P0442, P0446, P0449 or P0455.
    Cause
    The EVAP canister vent solenoid (CVS) valve draws fresh air into the system through a vent.
    Under certain operating conditions, dirt and dust intrusion into the EVAP CVS fresh air intake/venting system, may result in restricted air flow.
    Under certain operating conditions, water, if ingested into the EVAP CVS fresh air intake/venting system, may reach the CVS valve causing corrosion in the CVS valve, and may cause restrictions in the fresh air intake path, when the valve is in the closed position.
    Correction (1999-2007 Classic/Old Style Models)
    After following the published SI diagnostics and determining that the EVAP canister vent valve is the cause of the MIL light, replace the existing EVAP canister vent valve assembly with a new assembly. This new assembly is a sealed unit that is designed to be vented through a remote filter box. To ensure correct installation, follow the procedures below.
    Important:
    DO NOT replace the EVAP canister assembly for this concern unless it fails the leak test.
    1999-2003 Model Year (Use Service Kit P/N 19207762)
    1.
    Raise the vehicle. Suitably support the vehicle.
    2.
    Disconnect the EVAP canister vent valve electrical connector, if equipped.
    3.
    Disengage the two vent valve pipe clips securing the pipe to the underbody. Remove the clips from the underbody and discard.
    4.
    Disconnect the vent valve pipe at the EVAP canister.
    5.
    Remove and retain the EVAP canister vent valve bracket mounting bolt.
    6.
    Remove the complete EVAP canister vent valve assembly with bracket attached and discard.
    Important:
    The new canister vent valve will be installed in a new location, outside of the frame.
    7.
    Position and secure the new valve assembly to the frame bracket on the outside of the frame using the existing hole and mounting bolt.
    Tighten
    Tighten the bracket mounting bolt to 12
    Y
    (106 lb in).
    8.
    Connect the vent valve pipe to the EVAP canister.
    9.
    Install the two vent valve pipe clips into the existing underbody holes.
    10.
    Connect the EVAP canister vent valve electrical connector, if equipped.
    11.
    Attach bulk 5/8” heater hose to the vent valve port and secure using a clamp. Run a length as needed along the frame rail routing to the area above the transmission.
    12.
    Cut the hose to determined length and install the supplied filter box. Secure using a clamp.
    13.
    Remove the transmission support and lower the transmission assembly as necessary to allow for access to the new filter box location.
    14.
    Secure the filter box to the transmission vent hose just forward of the hose tee-section using a tie strap. DO NOT pinch or restrict the transmission vent hose. The filter box opening should be pointing downward.
    15.
    Raise the transmission and reinstall the transmission support.
    16.
    Tie strap the hose as needed along the frame rail in order to keep the hose away from pinch-points and heat sources.
    17.
    Lower the vehicle.
    2004-2007 Model Year (Use Service Kit P/N 19207763)
    1.
    Raise the vehicle. Suitably support the vehicle.
    2.
    Disconnect the EVAP canister vent valve electrical connector.
    3.
    Disconnect the canister pipe from the vent valve.
    4.
    Push in the retainer and remove the existing canister vent valve from the fuel tank clip or mounting bracket. Discard the old valve.
    5.
    Cut back the existing canister pipe approximately 51 mm (2 in) to remove the quick connect end.
    Crew Cab Short Box Shown Below, Other Configurations Similar
    Extended Cab Short Box Shown Below, Other Configurations Similar
    6.
    Install the new canister vent valve solenoid to the fuel tank clip or mounting bracket as shown above. The valve port closest to the electrical connector must point towards the canister.
    7.
    Cut bulk 5/8” heater hose to a length of approximately 76 mm (3 in). Install the hose between the solenoid and the canister pipe and secure using clamps.
    8.
    Attach bulk 5/8” heater hose to the vent port and secure using a clamp. Run a length as needed along the frame rail routing to the area above the transmission.
    9.
    Cut the hose to determined length and install the supplied filter box. Secure using a clamp.
    10.
    Remove the transmission support and lower the transmission assembly as necessary to allow for access to the new filter box location.
    11.
    Secure the filter box to the transmission vent hose just forward of the hose tee-section using a tie strap. DO NOT pinch or restrict the transmission vent hose. The filter box opening should be pointing downward.
    12.
    Raise the transmission and reinstall the transmission support.
    13.
    Connect the EVAP canister vent valve electrical connector.
    14.
    Tie strap the hose as needed along the frame rail in order to keep the hose away from pinch-points and heat sources.
    15.
    Lower the vehicle.
    Correction (2007-2010 New Style Models)
    After following the published SI diagnostics and determining that the EVAP canister vent valve is the cause of the MIL light, replace the EVAP canister vent valve assembly and relocate the remote filter box. To ensure correct installation, follow the procedures below.
    Important:
    DO NOT replace the EVAP canister assembly for this concern unless it fails the leak test.
    Use Service Kit P/N 19207763
    1.
    Raise the vehicle. Suitably support the vehicle.
    2.
    Disconnect the EVAP canister vent valve electrical connector.
    3.
    Disconnect the vent valve pipe quick connect from the canister.
    4.
    Either cut the existing valve vent pipe and leave the remaining section of pipe in the vehicle or remove along with the valve.
    5.
    Push in the retainer and remove the existing canister vent valve from the fuel tank clip or mounting bracket.
    6.
    Cut back the existing canister pipe approximately 51 mm (2 in) and retain the pipe for use with new valve.
    7.
    Connect the canister pipe quick connect to the canister.
    2500 Crew Cab Short Box Shown Below, Other Configurations Similar
    1500 Extended Cab Short Box Shown Below, Other Configurations Similar
    8.
    Install the new canister vent valve solenoid to the fuel tank clip or mounting bracket as shown above. The valve port closest to the electrical connector must point towards the canister.
    9.
    Cut bulk 5/8” heater hose to a length of approximately 76 mm (3 in). Install the hose between the solenoid and the canister pipe and secure using clamps.
    10.
    Attach bulk 5/8” heater hose to the vent port and secure using a clamp. Run a length as needed along the frame rail routing to the passenger side area above the transmission.
    11.
    Cut the hose to determined length and install the supplied filter box. Secure using a clamp.
    12.
    Remove the transmission heat shield, if necessary.
    13.
    Remove the transmission support and lower the transmission assembly as necessary to allow for access to the new filter box location.
    14.
    Secure the filter box to the transmission vent hose just forward of the hose tee-section using a tie strap. DO NOT pinch or restrict the transmission vent hose. The filter box opening should be pointing downward.
    15.
    Raise the transmission and reinstall the transmission support.
    16.
    Reinstall the transmission heat shield.
    17.
    Connect the EVAP canister vent valve electrical connector.
    18.
    Tie strap the hose as needed along the frame rail in order to keep the hose away from pinch-points and heat sources.
    19.
    Lower the vehicle.
    All International Shipments using First Class Mail will
    NOT
    include tracking information with the shipment.  Tracking information for International Shipments is only included with Priority and Priority Express Shipments.  Contact us for available options.