4X 1000mAh 3.7V Lipo BatteryLithium Micro JST 1.25 Plug for Arduino Nodemcu USA

Description

Specification: Standard Voltage: 3.7 V Rated Capacity: 1000 mAh Weight: 19.79 g / pc Working Current: 1.5 A Over-current protection: 2~3 A Overcharge limit pressure: 4.25±0.05 V Over-voltage limit pressure: 2.45±0.30 V Charge current time: Standard Charging: 0.2 C (8 hours); Fast charging: 0.5 C (2.5 hours). The maximum charging current: 0.5 C Continuous Discharge Current: 0.5 C The maximum discharge current: 1 C End-off voltage: 2.75 V / pcs Allowable charging temperature: 0℃ ~ +45 ℃ Allowable discharge temperature: -10 ~ +60 ℃ Allowable storage temperature: -10 ~ +40 ℃( within 3 months); -10 ~ +30 ℃ ( within 6 months).
4X 1000mAh 3.7V Lipo BatteryLithium Micro JST 1.25 Plug for Arduino Nodemcu USA
Seamuing 3.7V 1000mAh Lithium Rechargeable Battery Lipo Batteries with Micro JST 1.25 Plug, Protection Board and Insulation Coating for Arduino Nodemcu ESP32 Development Board (4 Pack)
USA STOCK! Fast delivery, Fast received!!!
About this item
[ Note ]: The maximum operating current of these 3.7 V lipo batteries are only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current
[ Usage ]: These 1000 mah lipo batteries can be used for esp32 arduino development board whose plug is 1.25mm
[ Built-in Integrated Protective Board ]: Prevent batteries from overcharge, over-discharge and short circuit
[ Charge Current Time ]: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours)
[ Important Parameters ]: Working Current:1.5 A; Size: 26 * 44 * 9 mm (1.02 * 1.73 * 0.35 inch); Weight: 19.79 g / pc
Product description
Features:
Built-in Integrated Protective Board: Prevent batteries from overcharge, over-discharge and short circuit
Note:
1.The maximum operating current of these 3.7 V lipo batteries are only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current
2. This product interface is 1.25 pitch male, it can be applied for esp32 development board whose plug is 1.25mm
Standard Charging Method: Charging this battery to 4.25 V at 0.2 C constant current, then charge the battery at a constant voltage of 4.2 V till it's charging current≤ 0.05 C.
Specification:
Standard Voltage: 3.7 V
Rated Capacity: 1000 mAh
Weight: 19.79 g / pc
Working Current: 1.5 A
Over-current protection: 2~3 A
Overcharge limit pressure: 4.25±0.05 V
Over-voltage limit pressure: 2.45±0.30 V
Charge current time: Standard Charging: 0.2 C (8 hours); Fast charging: 0.5 C (2.5 hours).
The maximum charging current: 0.5 C
Continuous Discharge Current: 0.5 C
The maximum discharge current: 1 C
End-off voltage: 2.75 V / pcs
Allowable charging temperature: 0℃ ~ +45 ℃
Allowable discharge temperature: -10 ~ +60 ℃
Allowable storage temperature: -10 ~ +40 ℃( within 3 months); -10 ~ +30 ℃ ( within 6 months).
Package Including
4 * 1000mAh 3.7V Lithium Rechargeable Batteries
Shipping
Feedback
Payment
About us
Contact us
Shipping
Fast shipping by
USA LOCAL FAST SHIPPING
, Mostly, all of the products will be shipped out within 1 working day after
we received the payment and your contact phone number, We always ship to your paypal address, so if your shipping address
is not matched with it, please note the address you want us to ship in paypal
Why Choose the
USA Stock
?
1.
USA Local Shipping
, No Extra Customs Cost to the
USA
2. Fast Delivery: 2-5 Working days Delivery
3. Best After-Sales Service!!!
Feedback
Please leave five stars positive feedback positive comment and
Five-Stars
.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything
.
communication Please!
Payment
We accept all major credit cards, PayPal, and Google Pay. Taxes may be applicable at checkout
, eCheque will be held until cleared, All ship to paypal address, Appreciated for the prompt payment, Contact us if bid by mistake, System open unpaid item automatically
About us
★
Welcome to our store ! We supply many products including unmanned drone and accessories, Batteries，Other RC Parts & Accs，Switches, Connectors & Wires，Electrical Testers, Test Lea
Accessories，Cars, Trucks & Motorcycles，Battery Testers，RC Tools & Sets，Chargers，Servos & Servo Accessories，Make-up Sets & Kits .High product quality, reasonable prices, excellent customer service and  a reliable credit standing is our tenet.
★Thank you for shopping at our eBay Store.
Contact us
★
You will receive our positive feedback as soon as you pay for your item.
★Your better comments will be an encouragement for us to offer the better quality and the better service in future.
★If you are not satisfied with them, please contact us first via Ask a Question or via Contact Seller. Your messages will be answered within 1-2 business day. We shall try our best to solve your problem to your satisfaction.
Brand
MakerFocus
MPN
Does Not Apply
Type
802540 3.7V Lithium Rechargable Battery
Voltage
3.7V
Capacity
1000mAh
Weight
17.96g
Working Current
1.5A
Overcurrent protection
2~3A
Dimentions
8.5*25*40（mm）
Chemical Composition
LiPo
Number of Cells (S)
2s
Compatible Scale
1:4, 1:15, 1:14, 1:12, 1:10, 1:8, 1:6, 1:5, 1:16, 1:27, 1:26, 1:20, 1:18, 1:24, 1:28, 1:75, 1:50, 1:48, 1:32, 1:36, 1:64, 1:325, 1:275, 1:100, 1:87, 1:96, 1:150, 1:1250, 1:2000