2pcs HRB 14.8V 4S 60C 2600mAh XT60 LiPo Batteryfor RC Drone Airplane Truck FPV

Description

无标题文档
Recommended Products
2pcs HRB 4S 60C 4000mah EC5
.99
2pcs HRB 4S 50C 5000mah EC5
.96
2pcs HRB 4S 50C 5000mah Deans
.96
2pcs HRB 4S 50C  6000mAh Deans
9.09
2pcs HRB 4S 50C 5000mah Traxxas
.99
2pcs HRB 4S 50C 6000mah Traxxas
9.99
Performance parameter
Capacity
2600mAh
Suggest charger
Balance charger
Cells
4S
Discharge rate
60C
Voltage per pack
14.8V
Discharge connector
XT60
Maximum voltage per pack
16.8V
Battery size
115*34*34mm
Voltage per cell
3.7V
Battery weight per piece
248g
Maximum voltage per cell
4.2V
Packing list
2 battery
Storage voltage per cell
3.85V
Warranty
6 Month
Order processing and transportation
1 We will ship from the New Jersey warehouse within 2 working days.
2 Enjoy limited warranty service within 180 days after receipt.
3 We are fully committed to products inspection and quality,If you have any problem,Pls contact us at time,We will respond within 24 hours.
4 If you are a wholesaler, please contact us to get more benefits.
Note
1 When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance.
2 Never Over-charge above 4.2V per cell and Over-discharge below 3.0V per cell. (Normal cell voltage is between 3.4V~4.2V)
3 Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.5v per cell). Do not use the battery that has too low a voltage.
4  Do not expose batteries to sunshine or storearge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst.
If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
Our services
HRB provides a 6-month warranty period. The after-sales is as follows;
1 The free has: if the battery has any quality problems within one month from the date of order placement. The buyer need to provide inspection pictures. Once confirmed we will arrange a free return.
2 1-3 months: if the battery has any quality problems , the buyer need to provide inspection pictures. Once confirmed we will arrange new battery to buyer. The buyer bear the freight.
3 3-6 months: if the battery has any quality problems , the buyer need to provide inspection pictures. Once confirmed we will give the clients discount when order new lipo.
Not included in customer reasons, such as overcharge, over discharger(Less than 3.6V), etc.
About us
Shenzhen Yowoo Electronic Technology Co.,Ltd was founded in 2012, registered capital is 100,000,000RMB.Our Company is concentrate on manufacture Lithium Polymer Batteries and we are one company that on research,production and sales as one of the high-tech Lithium Polymer Battery manufacturer. Our company has more than 30,000㎡,including office and factories.
We have some registered international brand,HRB,YouMe Power and Yowoo.We insist on "Devote oneself to offer better power solution for remote control High-tech Field".
In order to make high quality products,we keep on research and use high-end nanotechnology.Produce and use Grade A cells.We sell our goods to wholesalers,distributors and retailers,of course,we supply best service before ,in and after-sale service.