(2) JBL Professional Control 52 Surface-Mount Satellite Speakers (Black)

Description

Powered by
Frooition
My Store
About us
FAQ
Policies
Save Seller
(2) JBL Professional Control 52 Surface-Mount Satellite Speakers (Black)
(2) JBL Professional Control 52 Surface-Mount Satellite Speakers (Black)
Item Description
The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surface-mount system.
Control 52 Features:
Stylish, unobtrusive design fits into a wide variety of decors.
Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers.
16 ohms impedance.
Wall-mount brackets included.
Available in black or white.
Control 52 Satellite Speaker
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low-distortion 60 mm (2½ in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.
Control 50 Subwoofer
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T's included two-piece easy-mount wall-bracket installs quickly: The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.
System Configuration
Available as packaged system or as separate items, the Control 50 Series is extremely versatile system. The C50PACK system contains four Control 52 satellite speakers and one Control 50S/T subwoofer as an easy predesigned system. For smaller floor spaces, the Control 50S/T subwoofer can be utilized with two Control 52 satellite speakers. The Control 50 system is mono. Both the Control 50S/T and Control 52 can be intermixed in systems along with the Control 40 Series in-ceiling models - Control 40CS/T subwoofer and Control 42 satellite speaker - to match the form factor requirements of a wide variety of applications.
What's Included
This Package Includes:
(2) JBL Professional Control 52 Surface-Mount Satellite Speakers (Black) for Subwoofer-Satellite Loudspeaker System
Each Control 52 Box Includes:
(1) JBL Professional Control 52 Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System
(1) Wall Mount Bracket (Includes both speaker and wall parts)
(1) 2-Pin Locking Connector
Specifications
JBL Professional Control 52 Specifications:
Frequency Range (-10 dB)
140 Hz – 20 kHz
Frequency Response (±3 dB)
180 Hz – 17 kHz
Power Capacity
50 Watts Continuous Program Power (2 hrs)
25 Watts Continuous Pink Noise (2 hrs)
30 Watts Continuous Program Power (100 hrs)
15 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
85 dB (4.0V/1m = 1W)
82 dB (2.83V, 1m)
Nominal Coverage Angle
150° x 150° (omnidirectional)
Rated Maximum SPL (1m)
94 dB average, 100 dB peak
Nominal Impedance
16 ohms
Transducer Driver
60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
Input Connector
Removable locking 2-pin connector with screw-down terminals.
Max wire 12 AWG (2.5 mm
2
)
Material
High impact polystyrene, painted zinc-plated metal grille.
Dimensions (H x W x D)
Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)
Wall bracket: 51 mm (2.0 in)
Net Weight
0.7 kg (1.5 lbs)
Shipping Weight
0.8 kg (1.8 lbs)
Included Accessories
Wall bracket (both speaker and wall parts), 2-pin locking connector.
Two Retail Locations • One Massive Warehouse • Thousands of Items in Stock • Fast Free U.S. Shipping • Authorized Dealer for All Our Brands • Industry-Leading Support & Service • Dedicated, Reliable Staff •
Best Price. Period.
More Items!
View more great items
Electro-Voice ELX200-15-CVR Padded Cover for ELX200-15 or ELX200-15P
&dollar59.00
Mackie Thump12A 1300W 12?DJ PA Active/Powered Loudspeaker
&dollar299.99
JBL Professional Control 28-1High Output 8" Indoor/Outdoor Speaker, pair, white
&dollar509.04
JBL Professional Control 322C High-Output 12" Coaxial Ceiling Loudspeaker
&dollar550.00
© 2017 I DJ NOW. All Rights Reserved. Any use of this material including all content, images and design, without prior written consent from IDJNOW, is strictly prohibited by law.
Powered by
Frooition
Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.